Service Repair Manual
Models
962G WHEEL LOADER
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962G WHEEL LOADER 3BS
Configuration: 962G Wheel Loader 3BS00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Media Number -SENR1381-10
Publication Date -01/10/2007
Date Updated -25/10/2007
i07093515
Axle Housing - Disassemble
SMCS - 3260-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
138-7573
Link Bracket
2
B
1P-2420
Transmission Repair Stand
1
FT-0996
Positioning Group
4
FT-0957
Adapter Group
4
C
1P-1863
Pliers
1
D
4C-8358
Lifting Eyes
3
E
6V-7820
Torque Multiplier
1
120-9877
Spanner Wrench As(1)
1
1U-9478
Spanner Wrench As(2)
1
F
150-1782
Crossblock
1
5F-7366
Forcing Screw
1
3H-0466
Nut
1
3H-0468
Plate
2
9U-7692
Threaded Rod
2
(1) For use with M105 bearing nut.
1/8
962G Wheel Loader 3BS00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
(2) For use with M95 bearing nut.
Start By:
a. Remove the fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Remove
and Install".
b. Remove the oscillating axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) -
Remove".
Note: The axle housing assemblies that are used in the front fixed axle and in the rear
oscillating axle are similar. Therefore, both axle housing assemblies can be removed in the
same manner.
Illustration 1
g00301040
Typical Example
1. Install the axle housing in a vertical position on Tooling (B).
Note: Carefully remove the axle housing assembly. Part of the wear gauge pin will remain
in the axle housing assembly. The pin will remain in the axle housing assembly. The spring
and the piston will remain in the differential housing.
2. Fasten Tooling (A) and a hoist to the rim of the axle shaft, as shown. Remove bolts (1) that
secure axle housing