Service Repair Manual
Models
330D2 L Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330D2 L EXCAVATOR RCK
Configuration: 330D2 L Excavators RCK00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines
Media Number -UENR0633-19
Publication Date -01/07/2015
Date Updated -29/10/2018
i05292349
Inlet Manifold - Remove and Install
SMCS - 1058-010
Removal Procedure
Start By:
a. If necessary, remove crankcase breather and bracket. Refer to Disassembly and Assembly,
"Crankcase Breather - Remove" for the correct procedure.
b. If necessary, remove the fuel filter base and bracket. Refer to Disassembly and Assembly, "Fuel
Filter Base - Remove and Install" for the correct procedure.
c. Remove the fuel manifold. Refer to Disassembly and Assembly, "Fuel Manifold - Remove" for the
correct procedure.
d. Remove the wastegate solenoid. Refer to Disassembly and Assembly, "Wastegate Solenoid -
Remove and Install" for the correct procedure.
e. Remove the boost pressure sensor. Refer to Disassembly and Assembly, "Boost Pressure Sensor -
Remove and Install" for the correct procedure.
f. Remove the air inlet temperature sensor. Refer to Disassembly and Assembly, "Inlet Air
Temperature Sensor - Remove and Install" for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5(W)
w
2020/6/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 1
g03377680
1. Remove bolts (1) from inlet manifold (2).
2. Remove inlet manifold (2) from the cylinder head.
3. If necessary, follow Step 3.a through Step 3.b in order to remove inlet connection (3) from inlet
manifold (2).
a. Remove bolts (5) from inlet connection (3).
b. Remove inlet connection (3) and gasket (4) (not shown) from inlet manifold (2).
Illustration 2
g03377252
4. Note the position of dowels (6).
Installation Procedure
2/5(W)
w
2020/6/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_p