WH6 - WH7
10. STRUCTURE AN
20. TESTING AND A
30. DISASSEMBLY A
90. OTHER................
CONTENTS
CONTENTS
Pagina
D FUNCTION ...................................................................................... 10-1
DJUSTING ........................................................................................... 20-1
ND ASSEMBLY................................................................................. 30-1
...................................................................................................... 90-1
00-1
REMOVAL AND INSTALLATION
ENGINE HOOD
ENGINE HOOD
Removal
RKTA0330
1
1 -Lift the engine hood (1).
RKTA0340
3
2
2 -While supporting the engine hood, loosen and remove
the screws (2) retaining the hinges (3).
RKTA0350
4
5
6
3 -Remove the cotter pin (4), the backing washer, and dis-
connect the gas damper (5) from its support (6).
RKTA0360
A
4 -Lower the hood and place an anti-slip block (A) between
lower edge of hood and body; then, strap the hood and
connect it a hoist.
5 -Remove the hood (1).
[*1]
WH6 - WH7
30-15
REMOVAL AND INSTALLATION
ENGINE HOOD
Installation
RKTA0370
7
8
•
To install, reverse the removal procedure.
[*1]
1 -Adjust the position of the hood, ensuring that the lock as-
sembly (7) is centred in relation to the retaining hook (8).
RKTA0380
3
9
2 -Adjust the hinges vertically (3) to allow the closure seal-
ing strip (9) to evenly rest along the length of the hood.
RKTA0390
3
10
11
3 -Adjust the hinges (3) horizontally until full contact be-
tween the sealing strip (10) and the engine-transmission
mount (11) is achieved.
WH6 - WH7
30-16
REMOVAL AND INSTALLATION
AIR FILTER
AIR FILTER
Removal
RKTA0400
1
3
2
3
1 -Unscrew and remove the cap (1) from the surge tank (2).
2 -Loosen and remove the screws (3), remove the surge
tan