Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
SM-612 Rv 1
CGCKGP 40/70
Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
Clark arranges parts and service procedures by standard-
You can quickly
locate a specific point in the manual by
ized Groups. In this manual, Groups are similar to “chap-
using the headers and footers that appear on every Section
ters.” Groups are listed in the indexes on the next page.
page. The following
illustration points out these areas.
Each Group begins with a table of contents
that shows the
Sections contained within
the Group. Lengthy Sections
also begin with a table of contents.
Group ID
Each Group and Section has an identifying
name and
number, or “ID.”
Each Section page also has a unique
ID. The page ID
consists of three numbers separated by hyphens. The three
numbers represent
the Group number,
the Section number,
and the page number. For example, “OO- l-2” on the lower
corner of the page indicates Group 00, Section 1, Page 2.
Page ID
Section ID’
Manual ID
’ Section ID
The Group number sometimes has a letter or letters added
to it in parentheses
if one or more variations of the Group
exist. For example,
if the truck has a standard
transaxle,
Group 06 is expressed as “06(S);” if the truck has a hydro-
static transmission,
Group 06 is expressed as “06(H).”
This manual
is intended
for the use of trained
service
personnel.
Please read Group SA, “Safe Maintenance,”
and the Operator’s Manual before working on or operat-
ing the truck.
0 Copyright Clark Material Handling 1996
SM 612, Jun ‘97
Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
CONTENTS
Contents of this Manual
Group Index
Group SA. Safe Maintenance
Group PS. Periodic Service
Group 00. Engines
Group 01. Cooling System
Group 02.
Fuel System
Group 03. Air Induction System
Group 06. Transmission
Group 12.
Ignition System
Group 13.
Instrument Pod
Group 14.