EasySCAN 3D Guide
EasySCAN 3D User Guide
Installation
* Important Information *
- Please read and understand this guide before attempting to run the EasySCAN software and machine.
- This guide assumes you know how to use the Denford machine and software.
- You must be able to configure offsets and run your machine normally before attempting to scan.
1. Before connecting the Denford machine to your PC, insert the VR Milling V5 CD (version 5.13 and
above) into the PC.
If the machine and USB connections are already made, then disconnect and turn off the machine.
If your CD does not automatically run, then browse the CD, and run the file start
2. Install VR Milling (Option 1)
3. Once VR Milling has installed, return to the above setup screen and choose "Install EasySCAN
Drivers"
NB, This next installation screen may differ from shown, as the software is updated and changed.
EasySCAN 3D Guide
Let the installation process complete.
4. Now connect the USB cables to the machine, and the laser scanner inputs. Turn on the Denford
Machine.
5. You may now be asked to provide drivers for the Baldor USB device - this is the machine
connection
EasySCAN 3D Guide
The very first time you connect the USB cable and power up your Denford Machine, Windows will
automatically "detect new hardware" and request the correct driver. Only the supplied Denford USB driver will
work. The driver consist of two files: baldorusb.inf and baldorusb.sys. These files can be found on any of the
Denford VR machine installation CD's, typically in the D:\USB folder.
You will be asked to install the driver by the Hardware Wizard, which will look something like this (depending
upon operating system):
Select the option "Install from a list or specific location (Advanced)" then click "Next >"
EasySCAN 3D Guide
On this next screen, select "Include this location in the search" and enter "D:\USB" in the search path field.
Click "Next >"
During the next stages, you will be warned that the driver you are installing has not been verified b