BUILT-IN KIT MODEL UXA0024AXB/Q/W/S
IMPORTANT:This Built-In Kit is desinged for and approved only for those AMANA
AMC5143AAB/W/Q/S Microwave Ovens specifying Built-In Kit UXA0024AXB/Q/W/S
on rating label on the oven.
CAUTION: THIS OVEN REQUIRES INSTALLATION INTO A CABINET STRUCTURE ONLY. THIS
OVEN IS NOT DESIGNED FOR USE IN NON-CABINET INSTALLTIONS OR FREE-
STANDING APPLICATIONS ADJACENT TO (WITHIN 2 FEET OF) ANY GAS OR ELEC-
TRIC RANGE, COOKTOP OR OVEN.
The cabinet or wall opening must be within the following dimensions :
22-13/64" to 22-19/64"
HEIGHT 16-15/16" to 17-1/64"
DEPTH 15-3/4" minimum
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION!
❉ Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before install-
ing the built-in kit.
Remove the turntable tray from the oven cavity, if needed.
Screw A Type
Screw B Type
NO. PART NAME
DUCT BOTTOM 1
DUCT BACK A
DUCT BACK B
10 SCREW A
11 SCREW B
Screw-A TH,+, M4,L16, ZPC(YEL), MSMR1
STEP 1 : CABINET OR WALL OPENING
Provide an opening in the wall or cabinet, as indicated in SKETCH 1.
The depth should be a minimum of 15-3/4". The floor of the opening should be constructed of
plywood strong and thick enough to support the weight of the oven <about 50 lbs.> and installa-
First, punch the 4-holes using the template, Place the Duct-Rail on the Bottom of the Cabinet.
Coincide the Duct-Rail holes with the bottom holes of the Cabinet.
Screw the Duct-Rail using Screw B(4EA)
While the proper functioning of the oven does not require that opening be enclosed (with sides,
ceiling and rear partition) this may be required by local code, and it is suggested that the local
code be checked for any such requirement.
STEP 2 : T