Service Repair Manual
Models
D250E Articulated Truck
Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D250E ARTICULATED TRUCK 5TN
Configuration: D250E Articulated Truck 5TN00001-UP (MACHINE) POWERED BY 3306 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09
Publication Date -01/01/2013
Date Updated -25/01/2013
i00894497
Fuel Injection Pump - Install
SMCS - 1251-012
Installation Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
8S-2244
Pump Extractor
1
B
6V-4186
Fuel Pump Timing Pin
1
C
8T-5287
Wrench
1
D
6V-9128
Rack Position Tool Group
1
3S-3270
Indicator Contact Point
1
C-clamp
1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
D250E Articulated Truck 5TN00001-UP (MACHINE) POWERED BY 3306 Engine(S...
2020/2/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00507964
1. Install spacer (1) in the fuel injection pump housing.
Illustration 2
g00507989
Illustration 3
g00508002
2. Install Tool (B) in the fuel injection pump housing. Move the rack until Tool (B) can be
installed in order to hold the rack in the center position. The rack must be in the center
position in order to install the fuel injection pumps.
2/4
D250E Articulated Truck 5TN00001-UP (MACHINE) POWERED BY 3306 Engine(S...
2020/2/18
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Turn the camshaft until the lobe of the camshaft is downward so that the fuel injection pump
can be installed.
4. Install Tool (A) on the bonnet of the fuel injection pump.
5. Install the fuel injection pump in the fuel injection pump housing. Ensure that slot (3) that is
cut in the gear is aligned with the small pin (2) and groove (4) in the barrel. The small pin
(2) and groove (4) in the barrel are aligned with dowel (5) in the fuel in