CLICK HERE TO JUMP TO USE DIRECTIONS
The Easy Way To Get Rid Of Tree Stumps
READ THE ENTIRE LABEL FIRST.
OBSERVE ALL PRECAUTIONS AND
FOLLOW DIRECTIONS CAREFULLY.
DIRECTIONS FOR USE
HOW IT WORKS: GORDON’S STUMP REMOVER decomposes the wood of the
tree stump, leaving it porous right down into the root tips. After 4-6 weeks,
kerosene is poured onto the stump and the stump is ignited. The stump and roots
will burn a low, smoldering flame, not a big jumping flame.
FOR STUMPS ABOUT 12 INCHES TO 18 INCHES WIDE: Drill a 1 inch diameter
hole straight down from the top of the stump to a depth of about 10 inches. Then,
into the side of the stump about 4 or 5 inches down from the top, drill a 1 inch
wide hole slanting downward toward the bottom of the vertical hole. The
holes should meet or be close together (see illustration). It is important to drill the
side hole slanting downward to direct the solution into the crown and roots. Also,
when the holes meet, the natural ventilation helps to destroy the stump more
Next, pour at least 4 ounces GORDON’S STUMP REMOVER into each hole. Fill
with water and let stand. After 4 to 6 weeks, fill the holes with kerosene or fuel oil
and let stand until completely absorbed into the stump. Next, pour just enough
kerosene or fuel oil into the stump to ignite it. Or, burn charcoal on top of the
stump or around the base to start the stump burning. The stump will burn with a
smoldering, red glow, clear down to the roots, until only ashes are left.
quickly when ignited.
For quicker stump destruction, bore 2 sets of holes into the stump and pour 4 to
6 ounces GORDON’S STUMP REMOVER into each hole. Proceed as directed.
FOR LARGE DIAMETER STUMPS: For stumps wider than 18 inches, drill 2,
3 or more sets of vertical and slanting holes into the stump. Pour 4 to 6 ounces
GORDON’S STUMP REMOVER into each hole and proceed as directed.
PRECAUTIONS: Harmful if swallowed. Ingestion of large quantities can cause