Service Repair Manual
325 325L EXCAVATOR
Model: 325 L EXCAVATOR 2JK
Configuration: 325, 325L EXCAVATOR 2JK00001-UP (MACHINE)
Disassembly and Assembly
325, 325B and 325L Excavators
Media Number -RENR1178-03
Publication Date -01/09/2000
Date Updated -09/10/2001
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure For The Final Drive On CIPI
Undercarriage Arrangements Which Are Based On 325 and
325B Track Type Excavators
Transmission Repair Stand
Retaining Ring Pliers
(1) Threaded Rod
Push-Puller Tool Gp
325, 325L EXCAVATOR 2JK00001-UP (MACHINE)(SEBP2008 - 03) - Documentat...
Bearing Cup Puller Gp
Adjustable Screw Assembly
( 1 ) The 16 NF threaded rod is 280 mm (11 inch) long × 19 mm (0.75 inch) in diameter.
( 2 ) The spacer's outer diameter is 64 mm (2.5 inch). The spacer's inner diameter is 25.4 mm (1.0 inch). The spacer's
thickness is 6.4 mm (.25 inch).
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove" in this
1. Thoroughly clean the outside of the final drive prior to disassembly.
2. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
3. Fasten the final drive to Tool (A), as shown. The combined weight of the final drive and
final drive sprocket is approximately 361 kg (795 lb).