MATERIAL SAFETY DATA SHEET
PRODUCT: EPOXY PUTTY HARDENER
PART B
MSDS No:
19541
ISSUE: 5
DATE OF ISSUE:
22/08/08 Page 1 of 5
SECTION 1: IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name: Epoxy Putty Hardener (Part B)
Manufacturer’s Product Code: EPPYL1, EPPYL2, EPPYL4, EPPYL8, EPPYL20
Other Names: None
Recommended Uses: Use with Epoxy Putty Resin for repairing concrete
Ramset Fasteners (Aust) Pty Limited ACN 004 297 009
A Division of ITW Construction Products
Maroondah Highway,
Mooroolbark. Victoria. Australia. 3136
Telephone: 03 9726 6222
Emergency Telephone Number: 1300 780 063 (Monday to Friday. 7.30 am to 5.30 pm EST)
SECTION 2: HAZARDS IDENTIFICATION
- Classified as Hazardous according to criteria of ASCC -
Corrosive
Harmful
Risk Phrases
R21: Harmful in contact with skin
R22: Harmful if swallowed
R34: Causes burns
R36/38: Irritating to skin and eyes
R62: Risk of impaired fertility
R43: May cause skin sensitisation by skin contact
Safety Phrases
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical
advice
S28: After contact with skin, wash immediately with plenty of soap and water
S36/37/39: Wear suitable protective clothing, gloves and eye/face protection
S45: In case of accident or if you feel unwell, seek medical advice immediately (show the
label where possible)
S46: If swallowed, seek medical advice immediately and show this container or label
S61: Avoid release to the environment
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
Ingredient Chemical Identity
CAS Number
Proportion
Triethylene tetramine (TETA)
112-24-3
5 - 15%
2,4,6-Tris(dimethylaminomethyl)phenol
90-72-2
5 – 10%
4,4 – isopropylidenediphenol
80-05-7
0 – 5%
Ingredients not classified as hazardous
To 100%
MSDS Prepared in accordance with [NOHSC:2011 (2003)]
MATERIAL SAFETY DATA SHEET
PRODUCT: EPOXY PUTTY HARDENER
PART B
MSDS No:
19541
ISSUE: 5
DATE OF ISSUE:
22/08/08 Page 2 of 5
SECTION 4: FIRST AI