A2 (six parts)
Glue the reverse side of
part A2 to the reverse side
of part A1.
A3 (six parts)
Referring to Fig. A,
curl part A3 and glue
its reverse side to the
reverse side of part
Curl the dual ribbons of
part A3 by wrapping
them around a round
pencil, one at a time.
Assembling the flower basket: Parts group A
Before starting assembly:
Writing the number of each section on its back side before
cutting out the sections is highly recommended.
(* This way, you can be sure which section is which even after
cutting out the sections.)
sections should be glued together.
Assembly Instructions : Three A4 sheets (No. 1 to No. 3)
Bouquet (roses) : Assembly Instructions
© Canon Inc. © TakakoTakahashi
Assembling the core of the rose: Part 1 (Y1/O1/R1)
Glue the six surfaces
with blue dots on part
A4 to the reverse side
of part A1.
Assembling the roses: Parts groups Y, O, and R
You should have a total of six parts: two yellow [Y] parts, two orange [O] parts, and two
dark orange [R] parts. These parts differ only in color (denoted by color codes). Shapes
and assembly methods are the same for all colors.
We recommend using wood glue for these parts.
Step 1: Cut out along .
Step 5: By keeping line 1 horizontal as
you wrap the part around the pencil, curl
line 2 into a spiral.
Step 6: Complete the core of the rose by
gluing the area with the green dot in
After firmly gluing the two sides
together in step 3, cut out the part
while the glue is only partially dry
and shape firmly to give it a curve.
Be careful to avoid tearing the
Step 2: Fold down along .
Step 3: Glue the reverse sides together.
Step 4: With the surface with the
star mark on top, cut out along .
Bottom surface of
Glue the bottom surface to
complete the flower basket.
© Takako Takahashi