8750 – 53 Ave NW, Edmonton AB, T6E 5G2
TEL: 780.468.4064 FAX: 780.469.1899
TOLL FREE: 800.661.2792
360, 800 – 6 Ave SW, Calgary AB, T2P 3G3
TEL: 403.265.4401 FAX: 403.269.5540
TOLL FREE: 800.661.1343
For MSDS see www.di-corp.com
This product is a registered biocide under Agriculture Canada's "Pest Control Products Act".
(Registration # 22316). Chemical family: N-Coco Alkyltrimethylenediamine acetates.
ammonia vinegar odour
=11% @ (0.1 L/m3)
In drilling, well completion, work-over and stimulation applications, for control of algae, slime
forming and sulphate reducing bacteria. Dosage levels of up to 1500mg/L (active) in normal
situations and up to 3000 mg/L (active) for severe contamination are suggested. In packer fluids,
doses up to 300mg/L (active) are recommended.
Product dosage rate for proper concentration of active ingredient:
mg/L of Active Ingredient
Treatment Rate of Chemcide L/m3
Chemcide finds application in Secondary Oil Production, Petroleum Transport Storage Systems,
Surface Equipment and in general industrial areas.
MIXING AND HANDLING
Chemcide should be added at a point of low agitation to avoid foaming problems. Utilize eye/skin
protection and dust mask when mixing. Notice to user: Chemcide is a controlled product to be
used only in accordance with the directions on the product label. It is an offence under the
"Pest Control Products Act" to use a controlled product within unsafe conditions.
WHMIS: Controlled (see MSDS)
TDG: Not regulated
PACKAGING: 20 liter pail