tm4523 - 6200, 6200L, 6300, 6300L,6400, 6400L, 6500, 6500L Tractors
Assembling the Creeper Transmission
Assembling the Creeper Transmission
LX004145-UN: Creeper Transmission
Install connecting ring (A) on drive shaft.
Install snap ring (B).
NOTE:
Connecting ring axial play must be less than 0.1 mm (0.004 in.).
-: Snap Ring Thickness
LX008833-UN: Needle Bearing & Thrust Washers
Install needle bearing (B) with thrust washers.
Install snap ring (A).
Item
Measurement
Specification
Connecting ring
Axial play
less than 0.1 mm (0.004 in.)
Thickness of snap rings available
1.45 mm (0.057 in.) 1.65 mm (0.065 in.)
1.55 mm (0.061 in.) 1.75 mm (0.069 in.)
1/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
LX000220-UN: Gears
Position gear (B) on gear (C).
Install thrust washer (A) and snap ring.
Older tractor series:
LX000221-UN: Shift Collar
LX000222-UN: Install Shift Collar W/Pins
Install shift collar (A).
Before installing shift collar, mark position of bores and splines (see arrows).
Grease pins and install on shift collar.
Install shift collar with pins.
Latest tractor series:
2/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
LX1016947-UN: Retaining Ring
LX1016948-UN: Pin Installation
Install retaining ring (A) on the shift collar.
Install pins (B).
Install the shift collar and pins.
LX008834-UN: Drive Shaft Gears
Install gears on drive shaft.
NOTE:
3/5
2020/6/30
file:///C:/ProgramData/Service%20ADVISOR/Temp/tm4523_LXOUOE00319...
When installing gears, press shift collar against gears. This prevents the shift collar and pins from falling out.
LX008835-UN: Snap Ring Installation
Install the two axial bearings. Install snap ring (A).
Install lower snap ring of needle bearing.
LX008836-UN: Needle Bearing With Thrust Washers
Install needle bearing (B) with thrust washers.
Install upper snap ring (A).
LX008831-UN: Drive Shaft & Double Gear Ball Bearings
Install ball bearing (B) of drive shaft and ball bearing (A) of double gear.
4/5
2020/6/30
file:/