HP DESKJET 3520 SETUP
Open the packing box:
After confirming that the official seal is present on
the 123.hp.com/dj3520 shipment box, open the same.
Take all the accessories such as software disc, set up guide, user manual, and
others out of the carton.
Also, note that the supplies provided in the box vary depending on your country
Unpack the HP Deskjet 3520 printer:
Now, remove the new Deskjet 3520 printer from the packaging box and ensure
that there is no damage.
Make sure that the place in which you are going to locate the printer is free from
dust and foreign particles.
Lift the printer lid and then discard the packing tape for HP Deskjet 3520 Setup.
Now, lower the printer lid and then hold the handles that are present on either
side of the Deskjet 3530 printer.
Open the access door until it locks into position. After discarding the tapes, the
cartridge access door must be closed.
Once you open the paper tray door, pull the paper tray out and then take the
packaging tape out.
Move the tray into the 123.hp.com/setup 3520 printer until it fixes into place. Look
for any tapes are present at the rear side of your Hewlett Packard printer and
then discard the same.
Attach the cord and then power On the Deskjet 3520 printer:
To the back of your Deskjet 3520 printer, plug one end of the electrical cord.
Now, link the other end of the cord to an outlet and make sure that no extensions
are used for HP Deskjet 3520 Setup.
Turn the 123.hp.com/dj3520 printer On by pressing and holding the Power
Choose the language and country or region:
When you switch the printer On, it will instruct you to set the language, country
name, date, and region.
Now, go to the front panel of the 123.hp.com/setup 3520 printer and press the
down arrow key for selecting the language and then press the OK button.
Use the down arrow key for tapping the Yes option and choose OK. The Set
Country/Region dialog box displays on the touch panel.