http://www.prizmshare.com
CEO, Accusoft - jberlin@accusoft.com - http://www.accusoft.com
Pompom – how to
How-To by Lisa Sawyer
http://www.loomknittingdesigns.com
Materials:
• 1 piece of scrap card board – 2 inches by 4 inches
• any worsted or bulky weight yarn
• pair of scissors
Pompom Instructions:
Figure 1
Cut a piece of scrap cardboard about 2 inches
wide by 4 inches long. On each end, cut a notch
in the middle. See Figure 1.
Figure 2
Step 1:
Cut about an 8 inch piece of yarn for a tie. I’m
making the variegated pompom pictured above,
so I have two pieces in the picture, but you only
need one. See Figure 2.
© Copyright 2005-2006 loomknittingdesigns Lisa Sawyer
FOR PERSONAL USE ONLY. CANNOT BE USED FOR PROFIT.
Figure 3
Step 3:
With a separate ball of yarn (or 2, as in my case),
begin wrapping around the cardboard and the tie.
For worsted weight yarn, wrap about 50 times for
a good size pompom. For bulky weight yarn, wrap
about 25 times for a good size pompom.
Figure 4
Figure 5
Step 4:
Once you are done wrapping, grab both ends of
the length of yarn the we cut in step 1, and tie in a
tight (really tight) square knot around the
wrapping. See Figures 4 and 5.
© Copyright 2005-2006 loomknittingdesigns Lisa Sawyer
FOR PERSONAL USE ONLY. CANNOT BE USED FOR PROFIT.
Figure 6
Figure 7
Step 5:
Slide the tied wrapping off the cardboard. Hold the
tied yarn in your fist, cut the opposite side of the
wrapping with a pair of scissors. See Figures 6
and 7.
Figure 8
Step 6:
After cutting, shake out the cut pieces to form the
pompom. Trim the pieces into shape.
© Copyright 2005-2006 loomknittingdesigns Lisa Sawyer
FOR PERSONAL USE ONLY. CANNOT BE USED FOR PROFIT.