Rev. 1 - 01/97
ARCHITECTS' AND ENGINEERS'
The entry panel unit(s) shall be Alpha Communications® VI500
V.I.P.™ series, or approved equal. Panel(s) shall be flush mount
type. Panel(s) shall include the proper speaker components to
match the apt. intercom stations. Panel(s) shall have separate
alphabetical directory units, where required. Contractor shall
provide two (2) screwdrivers (per building), to the building
management (or superintendent), for future panel maintenance.
Panel(s) shall have solid aluminum push-button plungers, per-
manently engraved, and flush mounted to the faceplate surface.
A mesh speaker grille shall be provided to protect the speaker
components. Panel shall be made of a single piece of 3/8"
(9.5mm) thick solid extruded aluminum. Panel(s) shall have all
four (4) edges bevelled at a 45 degree angle to eliminate sharp
edges, and to enhance appearance. Where required, panel(s) shall
have the building name or address permanently engraved at the
Copyright© 1997-2000, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
(Shown with PO500I
Postal Release Option)
VI500 V.I.P.™ Series
Solid Aluminum Lobby Panels
The Alpha Communications® VI500 V.I.P.™ series extruded
aluminum (Vandal-Resistant) lobby panels are rugged, good-
looking panels for indoor or outdoor use.
Made of heavy 3/8" (9.5mm) thick solid extruded aluminum, the
VI500 series is made to take abuse. VI500 panels are all custom-
made to your exact size and layout specifications and are designed
for flush mounting. All four (4) edges are finished with a 45 degree
accent bevel, to eliminate any sharp edges. Other options for the
VI500 series include postal release switch (PO500I) built-in,
CCD camera (CCDCAM-I), and a host of optional speaker/
microphone and handset option