Service Repair Manual
308E2CR Mini Hydraulic Excavator
Product: MINI HYD EXCAVATOR
Model: 308E2CR MINI HYD EXCAVATOR MC5
Configuration: 308E2CR Mini Hydraulic Excavator MC500001-UP (MACHINE) POWERED BY C3.3B Engine
Disassembly and Assembly
308ECR and 308ESR Mini Hydraulic Excavators Machine Systems
Media Number -UENR3284-03
Publication Date -01/12/2017
Date Updated -05/12/2017
Stick - Remove and Install
SMCS - 6502-010
Tool Part Number
Lever Puller Hoist
Bearing Puller Adapter
Pin Puller Sleeve As
Double Acting Cylinder
Electric Hydraulic Pump Gp (115V)
Electric Hydraulic Pump Gp (230V)
a. Remove the bucket.
308E2CR Mini Hydraulic Excavator MC500001-UP (MACHINE) POWERED BY C3...
At operating temperature, the hydraulic oil is hot and under pressure.
Hot oils can cause burns.
To prevent possible personal injury, release the pressure in the work
tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits,
and the hydraulic oil tank at the filler cap before any hydraulic lines or
components are disconnected or removed.
Remove the filler cap only when the engine is stopped and the filler cap
is cool enough to touch.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local