Quick Steps: Canon Pixma TR4527 Setup
The multi-functional printer “Canon Pixma TR4527” is designed to satisfy small
home/office printing needs. Setting up this printer is quite a simple and easy task to
perform. The following step-by-step instructions explain how to perform the Canon
Pixma TR4527 Setup for the first time.
Step 1: Unpacking Printer
Unbox the product.
Take the Canon printer and its components out of the box. (Note: Contact your
printer dealer or manufacturer if any of the printer components is missing or
damaged inside the box).
Now, remove all the packing tapes from the printer.
Make sure to remove packing materials from the paper cassette properly.
After unpacking the Canon Pixma TR4527 Setup, place it on a clean surface
and continue with the next step given below.
Step 2: Turning On Printer
Get your printer’s power cord.
Connect the cord’s one end into your printer and the other end to an electrical
Locate the Power button and press it to turn on the printer.
Wait for the printer to become stable and idle.
Configure the initial printer settings correctly as per your needs.
Step 3: Installing Ink Cartridges
Open the front door, followed by the cartridge cover of your printer.
Wait for the cartridge carrier to remain idle.
During this time, unpack the FINE cartridges.
Once the carrier is idle, install the unpacked cartridges into their slots.
Close the cartridge cover, followed by the front door of the printer.
Step 4: Loading Paper
Pull out your printer’s paper cassette.
Based on the paper type that you’re loading, align the width guides.
Load the paper into the cassette correctly.
Adjust the width guides again and place the cassette back into the printer.
Press the OK button. Make sure that the output support is pulled out of the
Step 5: Aligning Print Head
Locate and press the Setup button on your printer’s operation panel.
From the list of menus, choose the Maintenance menu, followed by Head