ARCHITECTS' AND ENGINEERS'
The intercom handset station(s) shall be Alpha Commu-
nications®/Comelit SimpleBUS2 model# 2608, or ap-
proved equal. Handset(s) shall be surface mounted.
Handset(s) shall be connected using only two (2) looped
'common' wires and shall not require any selective (point)
wires or coaxial cabling. Handset(s) shall feature electret
condenser microphone for exceptional voice fidelity. Hand-
sets that include carbon transmitter or other voice tech-
nologies shall not be acceptable. Handset shall have a
textured finish and flexible coiled cord. Handset shall
include a door release button and one (1) auxiliary
pushbutton for optional features. Handset shall feature
an electronic tone signal, with a 2nd tone sound for
optional private door bell signaling. Handset shall be in
White and shall only protrude from the wall 2.30" inches
Contractor shall observe all local and national electrical
and building codes.
Copyright© 2008-2009, Alpha Communications®, All Rights Reserved SimpleBUS2 is a registered tradename of Comelit
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
The AlphaCommunications®/Comelit 2608 Simple-
BUS2 series 2-wire handsets are designed to meet
virtually any requirement for intercom security, while
not requiring any selective (home-run) wiring.
These attractive handsets are conveniently surface
mounted right on the wall. The 2608 is a perfect
handset to be used in intermixed syartems with
SimpleBUS2 video-intercom stations, such as mod-
els 5701, 5702, 5801, 5802, 6101B, and 6101W.
All 2608 series SimpleBUS2 handsets feature a
textured finish (to minimize scratches and finger-
prints), electronic tone signaling, flexible coiled cord
and one (1) momentary door release button switch,
and one (2) momentary button switch for additional