Press the
POWER button
and set the fan
to an acceptable
level. Using the NORMAL/
HIGH button, set the
unit to NORMAL. The
ActivePure (RCI) cell
and ionization are now
working (you'll see a blue
glow inside the unit).
65-00276-0408
FA_QS_65-00276-0408
1.
2.
Insert the power cord into the
back of the unit, then plug into
a nearby electrical outlet.
3.
Put the included AAA
batteries in the remote.
4.
Place your unit as high up as practical
(to achieve optimum air cleaning).
Refer to your owner's
manual for complete set up
and adjustment procedures.
© 2008 EcoQuest International
Battery
compartment
(2 AAA)
For increased smoke and odor control, set the unit to HIGH (see your owner's manual), then
use the PURIFIER UP and PURIFIER DOWN buttons to adjust the purification level to its low-
est setting (250ft2 or 23m2). After the first 24 hours of operation, gradually adjust up to the
square footage (or square meters) of the indoor area. The purifier setting should not exceed
the total area of the indoor environment.
See your owner's manual before using the AWAY MODE feature.
Power ON/OFF
Fan UP
Away Mode
ON/SET/OFF
Purifier UP
Purifier
DOWN
Fan
DOWN
Normal/
High
Reminder
Reset
QuickStart
*P65-00276-0408*
Replacement PartsA. Standard Ozone Output Cell*..US70728 No Ozone Output Cell .......US71090 Limited Ozone Output Cell....US70810B. RCI Cell Thumbscrews* (2) ....US70497C. Rear Electrostatic Screen*.....US70730D. Purifier Plate ...............US70171E. 9 Ft. Replacement Cord Pearl....................US70761 Black....................US70048F. 1.6 Amp Fuse...............US70063 G. Replacement Screws (5) White ...................US70731 Black....................US70732H. Screen Thumbscrews* (2) .....US70845I. Back Cover*................US70768J. Front Grill..................US70067K. Fan Blade..................US70024L. Phillips Screwdriver ..........US70066M. Remote Control.............US70733 * Fresh Air By EcoQuest Model 2 & Later Only.KGGGJGMLE IGABBDFCHH