Belkin Router Reset
The Belkin routers are efficient for the hardware reset and if you find any issues with the
default settings of the router, resetting it is the only
solution. You can delete the default settings,and the router will be back to the current fa
ctory settings. The Belkin router reset can be done with the help of the reset button on
the router, followed by simple steps.
How to Reset Belkin router
First, make sure that the router is powered on.
Now, turn the router and check for the reset button.
The Belkin router reset button would be red in color and will be highlighted with the
Then, make use of a bent paper clip or any thin object to press the reset button.
Keep pressing the reset button for about 10 seconds.
After releasing the Reset button, the router will be set to the factory default
Now, change the settings or make use of the same settings for Internet
Factory Reset Belkin Router
Soft factory reset,
First, enter the router URL and login to the router as an administrator.
Navigate to the Administration section and then choose Advanced Settings.
Then, select Restore Factory Defaults to factory reset Belkin router.
Now, the router will reboot and restore to factory settings.
Check for the Reset button at the rear of the router.
Verify that the router setup is powered on to factory reset Belkin router.
Now, keep pressing and holding the reset button about 15 seconds to reset Belkin
It will take some time to restart and reset to factory settings.
Reset Belkin Router Password
To reset Belkin router password, follow the instructions given below.
First, connect your Belkin router to the computer using a LAN cable.
After that, launch a web browser on your computer, click anywhere in the search
field, and type the 192.168.2.1 IP address.
Press the Enter button on your system’s control panel.
Click the Login button and type the current credentials in the given field.