TM13326X19 - 17G Compact Excavator (PIN: 1FF017GX_ _K225001— )
Engine Remove and Install
Engine Remove and Install
-: Specifications
REMOVAL
1. Park and prepare machine for service safely. See Park and Prepare for Service Safely . (Group 0001.)
2. Disconnect battery negative (-) cable.
3. Drain cooling system. See Drain Cooling System . (Operator’s Manual.)
4. Remove canopy. See Canopy Remove and Install . (Group 1800.)
5. Remove seat. See Seat Remove and Install . (Group 1821.)
6. Remove seat platform. See Seat Platform Remove and Install . (Group 1821.)
7. Remove counterweight. See Counterweight Remove and Install . (Group 1749.)
8. Remove primary fuel filter and water separator housing. See Primary Fuel Filter and Water Separator Housing
Remove and Install . (Group 0560.)
9. Remove final fuel filter housing. See Final Fuel Filter Housing Remove and Install . (Group 0560.)
10. Remove fan and fan guard. See Fan Remove and Install . (Group 0510.)
11. Remove air cleaner assembly. See Air Cleaner Assembly Remove and Install . (Group 0520.)
12.
CAUTION:
Avoid possible crushing injury from heavy component. Use appropriate lifting device.
SPECIFICATIONS
Cooling System Capacity
2.7 L
2.9 qt.
Canopy Support Weight (approximate) 23 kg
50 lb.
Engine Weight (approximate)
140 kg
309 lb.
Engine Mount Cap Screw Torque
88 N·m
65 lb.-ft.
Item
Measurement
Specification
Cooling System
Capacity
2.7 L
2.9 qt.
1/6
2019/11/16
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM13326X19_09001fa...
TX1190615A-UN: Canopy Support Assembly
LEGEND:
1 - Cap Screw (2 used)
2 - Canopy Support Assembly
3 - Cap Screw (2 used)
Using appropriate lifting device, support canopy support assembly (2).
13. Remove cap screws (1 and 3).
14.
TX1190616A-UN: Canopy Support Assembly
LEGEND:
2 - Canopy Support Assembly
4 - Cap Screw (2 used)
5 - Cap Screw (2 used)
Remove cap screws (4 and 5) and canopy support assembly.
15. Remove hydraulic pump. See Hydraulic Pump 1, 2, and 3 Remove and Install . (Group 3360.)
Item
Measurement
Specification