Page 1 5
Print Rev. Date 09/30/2005
MSDS Document
Product Dynatex® 49593 Brake System Silicone Compound
1. Chemical Product and Company Identification
Trade Name of this Product Dynatex® 49593 Brake System Silicone Compound
MSDS ID DYN49593
Manufacturer
Accumetric, LLC
350 Ring Road
Elizabethtown, KY 42701
Phone Number
(270) 769-3385
Emergency Phone
CHEMTREC (800) 424-9300
Revision Date
7/29/2005
1
0
0
Health
Fire
Reactivity
Specific
2. Composition and Information on Ingredients
Ingredient
CAS Number Weight %
ACGIH TLV
PEL
STEL
Amorphous fumed
silica
112945-52-5
5% - 15%
10 mg/mÅ
6 mg/mÅ
3. Hazard Identification
Eye Contact
Direct contact may cause temporary redness and discomfort.
Skin Contact
No significant effects expected from a single short-term exposure.
Inhalation
No significant effects expected from a single short-term exposure.
4. First Aid Information
Eye Contact
Immediately flush eyes with water for at least 15 minutes. Get medical attention if irritation
develops.
Page 2 5
Print Rev. Date 09/30/2005
MSDS ID DYN49593
Dynatex® 49593 Brake System
Silicone Compound
Skin Contact
Wash affected area with soap and water.
Inhalation
No first aid should be needed.
Ingestion
DO NOT INDUCE VOMITING. Seek immediate medical attention.
5. Fire Fighting Measures
Flash Point
>575F
Lower Explosive Limit
Not determined
Upper Explosive Limit
Not determined
Extinguishing Media
Use carbon dioxide or dry chemical on small fires. Use foam and/or water spray for large
fires.
Special Fire Fighting Procedures
Self-contained breathing apparatus and protective clothing should be worn when fighting
fires involving chemicals.
Unusual Fire or Explosion Hazards
None known
6. Accidental Release Measures
Steps to be taken in case of spill or release
Observe all personal protection equipment. Use absorbent material to collect and contain
material for disposal.
Local, state and federal laws and regulations may apply to releases and disposal of this
material, as well as those materials and items employed in the clean