Instructor Notes:
CATIA V5 Fundamentals - Lesson 4: Additional Features
Copyright DASSAULT SYSTEMES
4-1
Copyright DASSAULT SYSTEMES
Lesson 4: Additional Features
In this lesson, you will learn how to create additional CATIA features.
Case Study: Additional Features
Design Intent
Stages in the Process
Advanced Sketcher Tools
Multi-profile Pads and Sketches
Reference Elements
Revolved Features
Shelling
Thin features
Duration: Approximately 0.5 day
Lesson content:
Lesson Content
Student Guide: Lesson 4: Additional Features
Introduce the lesson. Present the lesson objectives and topics.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 4: Additional Features
Copyright DASSAULT SYSTEMES
4-2
Copyright DASSAULT SYSTEMES
Case Study: Additional Features
The case study for this lesson is the Handle Block used in the Drill Press assembly shown
below. The Handle Block is part of the Handle Mechanism sub-assembly. The focus of
this case study is the creation of features that incorporate the design intent of the part.
The Handle Block will consist of shafts, grooves, multi-profiles, fillets, chamfers, and a
shell feature.
Case Study: Additional Features
Student Guide: Lesson 4-Case Study: Additional Features
Introduce the case study for the lesson.
The handle block is part of the Handle Mechanisim sub-assembly.
Locate where the handle block is in the sub-assembly and where the sub-assemlby is in
the main assembly.
Consider opening the drill press assembly in CATIA and locating the handle block.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 4: Additional Features
Copyright DASSAULT SYSTEMES
4-3
Copyright DASSAULT SYSTEMES
Design Intent
XY plane
X-section of handle block
The top portion