MATERIAL SAFETY DATA SHEET
Complies with ANSI Z400.1 Format
SECTION 1: PRODUCT IDENTIFICATION
Product: WAX & FINISH REMOVER Sustainable Earth® 83 MSDS CODE: SEB8300.0607
Concentrated Wax & Finish Remover
None Regulatory Specialist
SECTION 2: COMPOSITION AND INFORMATION ON INGREDIENTS
% by Wt.
TWA: 10 (ppm) from
LD50 1230 mg/kg rat, oral
AIHA WEEL. (1994)
LC50 500 mg/m3 (rat)
6 ppm (ACGIH STEL)
LD50 1720 mg/kg rat, oral
3 ppm TWA8 ACGIH
LC50 (Not Available)
Diethylene glycol monohexyl ether
20 ppm TWA8 Dow IHG
LD50 = 4600 mg/kg rat male
Balance is water and similar non-hazardous ingredients.
*This component in this product is currently reportable in either SARA Title III: Sections 313, 40 CFR part 372 requirements.
NA = Not applicable NSR = No Special Requirements ND = Not Determined PEL = OSHA TLV-TWA = ACGIH
SECTION 3: HAZARD IDENTIFICATION
Primary Entry Routes: Eyes, Skin and Inhalation Signs & Symptoms of Exposure: Concentrate may cause mild irritation
to skin and eyes. Harmful or fatal if swallowed. Effects of Overexposure: SKIN: Mild irritation EYES: Mild irritation
INHALATION: May cause irritation and irritating effects to nose, throat and respiratory tract. INGESTION: Mild irritation
SECTION 4: FIRST AID MEASURES
Emergency First Aid Procedures: SKIN CONTACT: Flush immediately with plenty of water for at least 15 minutes.
Get medical attention immediately. EYE CONTACT: Immediately flush eyes with running water for at least 15
minutes, keeping eyelids open. Get medical attention immediately. INGESTION: Do not induce vomiting.