Service Repair Manual
312F GC Excavator
Model: 312F GC EXCAVATOR FKE
Configuration: 312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly
312F and 313F Excavators Machine Systems
Media Number -UENR6138-02
Publication Date -01/03/2015
Date Updated -14/12/2017
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Tool Part Number
Transmission Repair Stand
Slide Hammer Puller Gp
Backlash Gauge Gp
Bearing Puller Gp
Retaining Ring Pliers
Spanner Wrench As
a. Remove the final drive and the travel motor.
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine i