Rev. 3 - 04/03
Copyright© 1997-2003, Alpha Communications®, All Rights Reserved Tek-Micro® is a registered Trademark of Tektone Sound & Signal Mfg.
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.
Pager Interface Card
The NC363 Pocket Pager Interface Card, combined
with the appropriate software, adds pocket paging
capability to an NC350CP Tek-Micro® Nurse Call
System that already has a printer port in use. If it is
connected to a compatible pager system, it will provide
the necessary information for the pager system to
activate pocket pagers by zone and display call infor-
mation using the Motorola® Advisor Pocket Pager
format only. This allows calls and associated informa-
tion to be received by hospital personnel away from the
nurse call master stations.
The Tek-MICRO® Nurse Call System software auto-
matically detects and implements the NC363 Pocket
Pager Interface Card. The NC363 serial port uses a 25
pin DIN connector and RS232 protocol, at 300 baud,
to communicate to the appropriate pager system.
• Provides pocket paging capability to existing Tek-
Micro® Systems that already have a printer in use.
"Gold Contacts" for use buss connection.
Electronic components mounted on a
double-sided printed circuit board
with gold contacts.
Gold contacts for buss connection
and 25 pin DIN connector for serial
output to paging system.
Tek-MICRO® Nurse Call System with
standard software version 1.93/DSN soft-
ware version 4.03 or later
Pocket Pager Transmitter (or equivalent)