Service Repair Manual
Models
345C EXCAVATOR
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 345C EXCAVATOR TAJ
Configuration: 345C Excavator TAJ00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
345C Excavator and 345C MHPU
Mobile Hydraulic Power Unit Machine Systems
Media Number -RENR8612-06
Publication Date -01/02/2013
Date Updated -21/02/2013
i05331566
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1P-2420
Transmission Stand Group
1
B
138-7573
Link Bracket
2
C
1P-1860
Retaining Ring Pliers
1
D
4C-8359
Eyebolt
3
E
4C-8359
Eyebolt
2
F
138-7574
Link Bracket
2
Start By:
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive and Travel Motor
- Remove" in this manual.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
1/13
345C Excavator TAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP4347 ...
2020/7/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g01207795
2. Remove coupling (1) from final drive (2) .
3. Attach a suitable lifting device to the final drive, and turn final drive (2) over 180 degrees.
The weight of final drive (2) is approximately 590 kg (1300 lb).
Illustration 2
g01207796
4. Attach the final drive to Tooling (A) . Put an alignment mark across the sections of the final
drive for assembly purposes. All parts must be reinstalled in the original locations.
5. Remove socket head screws (3) from the final drive cover.
2/13
345C Excavator TAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP4347 ...
2020/7/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 3
g01207801
6. Attach Tooling (B) and a suitable lifting device to cover (5) , as shown. The weight of cover
(5) is approximately 52 kg (115 lb).
7. Remove bolts (4) and the was