Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
SERVICE MANUAL
SM535
NP 1520-12D
WARNING
Read and observe all warnings on the unit
before operating it. Do not operate this
equipment unless all factory installed guard
and shields are properly secured in place.
SM535 00-00
Copyrighted Material
Intended for CLARK dealers only
Do not sell or distribute
INTRODUCTION
This manual is intended for the service mechanic
who is seeking information about maintenance and
service.
It contains a section on troubleshooting
which will enable a qualified mechanic to locate
and solve problems which may occur.
This manual does not contain operation instructions
or parts information. For operation instructions or
parts
information,
refer to Clark Co. Product
Support Department.
An index for this manual is located on the following
page. The manual is arranged according to major
sections.
The first part of the page number
indicates the section it belongs in, and the second
number identifies the page number. The higher the
number of the section, the farther in the manual it is
located. The sectional breakdown is as follows:
Section 05 Frame
Section 10 Controls
Section 15 Transmission
Section 20 Electrfcal System
Section 30 Hydraulic System
Section 35 Tires
Section 40 Shielding
Section 41 Jacking and Hoisting
Section 45 Mast
Section 50 Specification Table and Charts
Section 99 Troubleshooting
Although information
in this -manual is based on
industry sources and is as complete as it was
possible
to make it at time of publication,
the
possibility
exists
that some make later have
changes, which could not be included here. Such
information would appear in next edition of this
manual and in updated pages.
“WARNING”
PRELIMINARY SERVICE
Examine
this Clark Electric Truck carefully
to
determine whether or not it has been damaged in
shipment.
Any damage should be immediately
reported to the transportation company.
This machine should also be c