BioAxxis® MA1 Series Fingerprint Door Lock
Audit Trail Software Operation Manual
1. Running the system and sign in.
After the software is installed, click Windows menu [Start]-[Program]-[Fingerprint
Lock]-[ FPLock] to run the software.
¾ Click [Exit] if you want to exit.
¾ When you sign in at the very first time, the administrator’s ID is “Super
Manager” and the tacit password is 123456.
Below is the management interface:
2 Serial Port Setup (as above window)
After you sign in the audit trail software, please enter System/Serial Port Setup menu to
edit parameters as per the real situation.
¾ Serial Port here refers to the 232 port of the PC (Serial Port 1 or Serial Port
Note: The communication will fail if the serial port is set improperly.
The simplest method for testing serial port number is testing it with
an external Modem.
3 Adding New Users
¾ Click [User Info]，then click [new] to add new users as below：
Add the information
of the lock which
the new user
going to use
¾ Enter the information of the relevant user, then click [confirm].
Click [Add] to add the information of the lock which the user is going to use. The lock
ID, Role and the user ID in the assigned lock registered in the software must
correspond with those registered in the lock.
For instance, if the Role of the new user is USER, his ID number registered through the
lock and the assigned lock ID is 01, then in the software, the lock ID should be 1, the
user Role should be USER and his ID number in the lock should be 5.
4 Editing the Users
¾ In [User Info], select the user and click [Edit] to edit.
5 Deleting the Users
¾ In [User Info]，select the user and click [Delete] to delete.
6 Timing the lock
menu button to enter the timing menu (Before timing, the lock
should be in the communication status. Press *1. When both the two LEDs
turn on, the lock is in the communication st