Cisco-Training.net
1
Refer to the exhibit. Router B receives a packet with a destination address of
10.16.1.97. What will router B do?
drop the packet
forward the packet via the route to 10.16.1.0
forward the packet via the route to 10.16.1.64
*use the default route
2 A network is converged and the routing tables are complete. When a packet
needs to be forwarded, what is the first criterion used to determine the best path
in the routing table?
the route with the smallest AD
*the route with the longest address and mask match to the destination
the route with the highest bandwidth
the route with the best combination of AD and lowest cost
3
Cisco-Training.net
Refer to the exhibit. Which statement correctly describes this network?
EIGRP is being used
*There is at least one parent and one child route
192.168.2.0, 192.168.3.0, and 192.168.4.0 networks are child routes
Traffic going to 172.16.3.0 will be directed to s 0/0/1
4
Refer to the exhibit. Router1 has been issued the ip classless command. What
happens to packets destined to host 172.16.3.10?
they are dropped
sent to default gateway
*forward out interface Serial0/0/1
forward out interface FastEthernet 0/0
5 The following entry is displayed in the routing table:
R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:26, Serial0/0/1
Cisco-Training.net
What type of route is this?
a level 1 parent route
a level 1 supernet route
*a level 1 ultimate network route
a level 2 child route
a level 2 ultimate child route
6 What determines if the router implements a classless route lookup process?
Child routes are present in the routing table.
A classless routing protocol has been configured on the router.
*The command ip classless is enabled on the router.
Multiple routes with different masks to the same destination are in the routing
table.
Routing table entries have a next-hop IP address and an exit interface for each
child route.
7