Page 1 of 3
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA’S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200 AND
SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499.
STANDARD SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
SECTION I (IDENTIFICATION)
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive
Menomonee Falls, WI 53051 USA
Eutectic 1005 ExFlux
SECTION II (HAZARDOUS INGREDIENTS/IDENTITY INFORMATION)
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases produced during normal use of
these products are covered in Section V. The term "Hazardous" in "Hazardous Ingredients" should not only be interpreted as a term required and
defined in OSHA Hazard Communication Standard (29 CFR Part 1910.1200), but also as defined by other regulatory agencies. The chemicals or
compounds subject to reporting under Title III, in Section 313, of the Superfund Amendments and Reauthorization Act (SARA) are marked by the
WARNING: This product contains or produces a chemical known to the State of California to cause birth defects (or other reproductive harm) and
cancer. (California Health & Safety Code 25249.5 et seq.)
Exposure Limit (mg/m3)
Percent Ingredients (by weight)
60 – 100
1 – 5
DANGER: CORROSIVE. CAUSES BURNS TO ANY AREA OF CONTACT. MAY BE HARMFUL OR FATAL IF
SECTION III (PHYSICAL DATA) - Beige powder
SECTION IV (FIRE AND EXPLOSION HAZARD DATA)
Non-Flammable: Flames used for brazing or soldering can ignite combustibles.