Service Repair Manual
Models
D11N TRACK-TYPE TRACTOR
Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11N TRACK-TYPE TRACTOR 74Z
Configuration: D11N TRACTOR / POWER SHIFT / 74Z00001-UP (MACHINE) POWERED BY 3508 ENGINE
Disassembly and Assembly
D11N & D11R TRACTORS POWER TRAIN
Media Number -SENR3287-05
Publication Date -01/06/2004
Date Updated -13/11/2017
SENR32870029
Drive Shaft
SMCS - 3253-012; 3253-011
Remove Drive Shaft
1. Remove the floor plate from the machine.
2. Remove two bolts (3) and clamps (2). Move the hoses away from guard assembly (1).
1/6
D11N TRACTOR / POWER SHIFT / 74Z00001-UP (MACHINE) POWERED BY 35...
2020/2/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Remove the bolts that hold guard assemblies (1) and (4) in place, and remove the guard
assemblies.
4. Fasten Tooling (A) to the inside of the cab as shown.
5. Fasten a nylon strap to drive shaft (6). Fasten the end of the strap to Tooling (A).
6. Remove four bolts (5) from each end of the drive shaft.
7. Use Tooling (A) and remove the drive shaft from the machine. The weight of the drive shaft is
43 kg (95 lb).
8. Remove four bolts (8) and bearing (7) from each end of drive shaft (6).
2/6
D11N TRACTOR / POWER SHIFT / 74Z00001-UP (MACHINE) POWERED BY 35...
2020/2/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Fasten Tooling (A) to yoke (9). Remove the yoke from the machine. The weight of the yoke is
32 kg (70 lb).
NOTICE
Do not remove race (10) unless a replacement is needed. The race will
be destroyed when it is removed.
10. If necessary remove ring (11) and race (10) from yoke (9).
11. Remove bolts (13) bracket (12) and cover (14).
12. Remove O-ring seal (16) and seal (15) from cover (14).
3/6
D11N TRACTOR / POWER SHIFT / 74Z00001-UP (MACHINE) POWERED BY 35...
2020/2/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Install three 1/2 - 13 NC forcing screws in cage (17). Tighten the forcing screws