Service Repair Manual
279C2 COMPACT TRACK
Product: COMPACT TRACK LOADER
Model: 279C2 COMPACT TRACK LOADER KWB
Configuration: 279C2 Compact Track Loader KWB00001-UP (MACHINE) POWERED BY C3.4 Engine
Disassembly and Assembly
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders Power Train
Media Number -KENR8831-06
Publication Date -01/01/2016
Date Updated -06/01/2016
Piston Pump (Hydrostatic) - Remove
SMCS - 5070-011-H7
Tool Part Number
Pump Removal Handle As
Retaining Ring Pliers
(1) For use on 21 mm head bolts.
(2) For use on 14 mm head bolts.
a. Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank -
b. Remove the implement pump. Refer to Disassembly and Assembly, "Piston Pump -
279C2 Compact Track Loader KWB00001-UP (MACHINE) POWERED BY C3.4 En...
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of
the components should be thoroughly cleaned. This will help to prevent dirt from entering the
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and