HP ENVY 5055
Setup - HP ENVY
If you do not know how to HP ENVY 5055 Wireless Printer Setup then you
can read the post here you will know how to setup hp envy printer.
The HP Envy 5055 is an all-in-one printer for printing and mobility tasks manufactured and sold by Hewlett-Packard. The HP
Envy 5055 Printer lets you print, copy and scan with great ease. Install the drivers compatible with HP Envy 5055 Wireless
Setup and you can easily enable all HP features for your convenience.
The HP Envy 5055 configuration can be used in wired and wireless configurations for normal installation. With our easy
installation and proper setup, you can connect a computer and peripherals to your HP printer. Although setting up the HP
Envy 5055 can be a bit of a daunting task, it can be done quickly and nicely with a few simple steps described below.
HP Envy 5055 Wireless Setup – Hardware Setup
To configure the HP Envy 5055 wireless with your device and network, you can use a USB cable or wireless mode. However, it
is recommended that you use a USB cable to avoid connectivity interruptions that may occur at any time when setting up the
HP Envy 5055 for the first time.
Here we go with the HP Envy 5055 step-by-step setup:
To install the HP Envy 5055, you’ll need to first unpack the printer, then you’ll need to install the drivers, insert the cartridge
into the appropriate location, and finally connect it to peripherals. These prerequisites for HP Envy 5055 wireless
configuration can be found listed below in the following steps:
• First, you need to take the HP Envy 5055 printer out of its packaging and place it in the appropriate location.
• Next, connect your printer to the power supply.
• Then turn on the printer and proceed to install the cartridge.
• To install the ink cartridge, open the cartridge access door while the printer is on.
• Now place the ink cartridge in its pro