E40.2SR - E50.2SR
WORKSHOP MANUAL
ENGLISH
Pubblication Nr. 604.13.368
Edition 08/2004
English - Printed in Italy
Printed by Studio ti - 41204
INTRODUCTION
AVOID ACCIDENTS
Most accidents, whether they occur in industry, on the farm, at home or on the highway, are caused by the failure of
some individuals to follow simple and fundamental safety rules or precautions. For this reason MOST ACCIDENTS
CAN BE PREVENTED by recognising the real cause and doing something about it before the accident occurs.
Regardless of the care used in the design and construction of any type of equipment there are conditions that cannot
be completely safeguarded against without interfering with reasonable accessibility and efficient operation.
Carefully read indications, cautions and safety warning quoted in the “SAFETY RULES” section.
A careful operator is the best insurance against an accident.
The complete observance of one simple rule would prevent many thousand serious injuries each year.
That rule is:
Never attempt to clean, oil or adjust a machine while it is in motion.
□ATTENTION
On machines having hydraulically, mechanically and/or cable controlled equipment (such as showels,
loaders, dozers, scrapers etc.) be certain the equipment is lowered to the ground before servicing, adjust-
ing and/or repairing.
If it is necessary to have the equipment partially or fully raised to gain access to certain items, be sure the
equipment is suitably supported by means other than the hydraulic lift cylinders, cable and/or mechanical
device used for controlling the equipment.
COPYRIGHT BY FIAT KOBELCO CONSTRUCTION MACHINERY S.p.A.
Product Support - Documentation Centre
Strada di Settimo, 323 - S. Mauro T.SE (TO) ITALY
All rights reserved. Reproduction of text and illustrations in whole or in part, is strictly prohibited.
0-1
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
0-2
GENERAL SAFETY INFORMATION
WARNING
Do not operate or perform any maintenance on this
machine until all instructions found in the OPERA-
TION & MAINTENANCE MANUAL have been thor-
o