Thank you for purchasing a Victory Refrigeration Deep
Well Horizontal Bottle Cooler! This unit has passed our
strict Quality Control Inspection and meets the high
standards set by Victory Refrigeration. You have made a
quality investment that with proper maintenance will give
you years of service.
Please read the following installation and maintenance
instructions before installing or using your unit. If you have
any questions, please call our Customer Service
Department at (856) 428- 4200. The Bottle Cooler is to be
used only for the storage of “non-potentially hazardous
bottled and canned beverages” !
All units are performance tested and thoroughly inspected
prior to shipment. Upon receipt, examine the exterior of
the shipment packaging for any signs of rough handling. If
the cabinet is damaged, it should be noted on the delivery
slip or bill of lading and signed. A claim must be filed
immediately against the carrier indicating the extent and
estimated cost of damage incurred.
Locating Your New Cooler
Consider the following when selecting a cooler location:
1. Clearance - Coolers are to have a minimum clearance
space of 2”(inches) from walls and/or low ceilings.
2. Leveling - Coolers must be leveled when installed.
Although the cooler is plumbing free, failure to level
your cooler may result in condensate water not draining
3. Floor Load - The floor on which the cooler will rest
must be free of vibration and suitably strong enough to
support the combined weights of the cabinet plus the
maximum product load.
4. Ventilation - The air cooled, self-contained refrigeration
system requires a sufficient amount of cool, clean air.
Avoid placing the cooler near heat generating
equipment such as ovens, ranges, heaters, fryers,
steam kettles, etc., and out of direct sunlight. Avoid
locating the self-contained cooler in an unheated room,
or where the room temperature may be below 65°F.
The electrical supply should always be performed by a
qualified electrician i