CertInside HP0-239
Http://www.CertInside.com CertInside Help you pass any IT Exams
HP HP0-239
Supporting the Modular Array(MA) Storage Family
Q&A v 2.29
http://www.CertInside.com/
CertInside,The Most Realistic Practice Exams!
CertInside HP0-239
Http://www.CertInside.com CertInside Help you pass any IT Exams
1. Which command is used to view the available utilities offered by the ACS firmware?
A. LIST
B. DIRECTORY
C. VIEW UTILITIES
D. SHOW UTILITIES
Answer: B
2. Which ACS Version is required to run DRM?
A. 8.7D
B. 8.7F
C. 8.7P
D. 8.7S
Answer: C
3. In Transparent Failover mode, unit D102 with no preferred path is presented through port ____.
A. 2 on the bottom controller
B. 2 on both controllers
C. 1 on both controllers
D. 1 on the top controller
Answer: A
4. An MA8000 has been operating in a single controller configuration. You added a second HSG80 controller for
redundancy and started a CLI session through the serial port of the new (lower) controller. Which command do you use
to include the new controller into the existing configuration?
A. SET FAILOVER COPY=THIS_CONTROLLER
B. SET MULTIBUS_FAILOVER=THIS_CONTROLLER
C. SET FAILOVER COPY=OTHER_CONTROLLER
D. SET MULTIBUS_FAILOVER=OTHER_CONTROLLER
Answer: C
5. What do you enter at the CLI prompt to configure a CCL (command console LUN) on your HSG80 controller which
will be fixed to LUN 0?
CertInside HP0-239
Http://www.CertInside.com CertInside Help you pass any IT Exams
A. SET THIS_CONTROLLER SCSI_VERSION=SCSI-2
B. SET SCSI_VERSION=SCSI-2
C. SET D0 SCSI_VERSION=SCSI-3
D. SET THIS_CONTROLLER SCSI_VERSION=SCSI-3
Answer: D
6. You want to remotely configure an HSG80 controller. Before the first remote connection can be established, you must
establish a local connection and ____.
A. create a CCL (command console LUN)
B. configure the node ID
C. set the correct time an