Rev. 5 - 02/09
The SF155B Emergency Station may be used in any
location where activation of an emergency signal is
required. All electronic components are mounted on a
circuit board. The SF155B features a built-in Red (flash-
ing) LED, and 6 foot nylon pull cord. The SF155B is used
primarily with the NC110A, NC110N, NC150N, NC150R,
and NC200N series nurse/emergency-call systems. The
SF155B is U.L. 1069 listed, to the latest standards.
Due to the flexibility of its design, it may be used as a
PULL CORD EMERGENCY STATION, OR a PUSH TYPE
EMERGENCY STATION. The pull cord supplied may be
used for emergency call activation or if so desired, the
LARGE RED push/pull down lever may be used.
• U.L. Listed 1069, to the latest standards
Simple and flexible operation.
RED L.E.D. "Called Placed" indicator (flashing)
• Call cancel only at point of origin.
Flame-retardant type KJB Cycolac Plastic
Can be used as a Pull or Push type station
Height: 4.50" (114mm)
Width: 2.81" (72mm)
Depth: 1.63" (41mm)
Projects: 0.69" (17mm) from mount-
ing surface (including RED pull/push
Construction: Electronic components and DPDT
switch, circuit board mounted. Face-
plate is made of KJB Cycolac Plastic,
with the word 'EMERGENCY' im-
printed in White on the station
Plug-in connector wiring harness
Steel City #52171 box with Steel City
#52C14 plaster ring, or Alpha Commu-
nications® Model #IH358 box with
IH357 ring, or EXACT EQUAL. Vertical
Copyright© 1997-2009, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.
ARCHITECTS' AND ENGINEERS'