8750 – 53 Ave NW, Edmonton AB, T6E 5G2
TEL: 780.468.4064 FAX: 780.469.1899
TOLL FREE: 800.661.2792
360, 800 – 6 Ave SW, Calgary AB, T2P 3G3
TEL: 403.265.4401 FAX: 403.269.5540
TOLL FREE: 800.661.1343
For MSDS see www.di-corp.com
DRISPAC (PLUS) REGULAR & DRISPAC (PLUS) SUPERLO
Drispac (Plus) is a high molecular weight, polyanionic cellulose polymer of high purity. It is
available in Regular and Superlo grades.
Light coloured powder
Cellulose fluid loss polymer
Soluble (complete in water)
>100% @ (3.0 kg/m3)
Drispac (Plus) is a primary fluid-loss reducer for water-based drilling fluids. Drispac (Plus)
Regular also provides secondary viscosity. When fluid loss control without additional
viscosity is required, Drispac (Plus) Superlo should be used.
Both Drispac (Plus) Regular and Drispac (Plus) Superlo are used in concentrations of 3.0-10.0
kg/m3 in saline water based muds whereas fresh water based mud systems normally use
concentrations of l.0-3.0 kg/m3. Drispac (Plus) can be used at temperatures up to 150°C.
MIXING AND HANDLING
Drispac (Plus) should be stored in a dry location. In order to avoid lumping it is added to the
mud system through the hopper at 30-40 minutes per sack. It is advisable to use a dust mask
and eye protection while mixing all powdered products.
WHMIS: Not controlled
TDG: Not regulated
PACKAGING: 50 lb sack