EPOPLEX MA50 QUICK-KITS
PRODUCT DESCRIPTION
Epoplex MA50 two component 100% solids epoxy adhe-
sive is now available in plural component, pre-loaded,
small volume cartridges. Epoplex MA50 Quick-Kits are
designed for adhesive applications requiring small volumes
of material. Quick-Kit packaging provides a safe, easy,
economical way to mix and apply Epoplex MA50 adhesive
without hand mixing or expensive dispensing equipment.
PHYSICAUCHEMICAL CHARACTERISTICS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Percent Solids
100%
. . . . . . . . . . . . . . . . . . . . .
Pot Life @ 77'F/25'C.
10 minutes
Tensile Strength
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASTM D-638.
2,900 psi
Tensile Bond Strength
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC1550
300psi
(1 00% concrete failure)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viscosity
.35,000 cps
. . . . . . . . . . . . . .
Weight per gallon
Component A = 10.8 Ibs.
Component B = 11.4 Ibs.
Adhesive Strength
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MIL-D-24613
220psi
Compressive Strength
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASTM C-695.
1 1,000 psi
*All test results are after seven days
APPLICATION
Epoplex MA50 Quick-Kits are mixed and applied using a
static mixing tube (included with kits) and a two-compo-
nent pneumatic dispensing gun (sold separately).
Epoplex's pneumatic dispensing gun is designed exclu-
sively for mixing and application of Epoplex MA50 Quick-
Kits. Pneumatic guns are available from
Epoplex by ordering part #88008. Contact your
Epoplex representative for more information.
Epoplex MA50 is formulated to meet
the requirements of AASHTO
Specification No. M237-90, Table 3,
hiahway surfaces, but can also be 1
-
-
.
used as a heavy-duty bonding and/or
patching material. MA50 can be used for both structural
and architectural applications. For complete information on
Epoplex MA50,