TECHNICAL DATA SHEET
AQ070 - AQUALITE 70
Last Rev Date: 10/29/2007
Solids By Weight
38 - 42%
Specific Gravity @ 77º F (25ºC)
11.10 - 12.45
Non-Flammable during use
6 months when properly agitated
Weight Per Gallon
Approvals and Certifications
U.S. Patent #5,437,722
AQ070 - AQUALITE 70 is a highly efficient, wax based waterproofing agent for gypsum board. Some of its attributes are:
· Environmentally friendly.
· Low defoaming tendency in plaster slurries.
· Easy clean up and disposal.
AQ070 - AQUALITE 70 is used primarily as a waterproofing agent for gypsum board. It may also be used in waterproofing agent
in other applications.
In gypsum board, levels of usage vary depending on board formulation, gypsum characteristics, and process variables. When
producing 1/2" board, the most efficient users are able to meet 5% water absorption requirements with 40 - 50 lbs. of AQ070 -
AQUALITE 70 per thousand square feet of gypsum board.
Excessive mechanical shearing of the emulsion should be avoided.
Liquid material can be rinsed with water. Dry material can be scraped up for disposal.
Protect from freezing. Mix thoroughly before use.
AQ070 - AQUALITE 70 should be stored at a temperature of 50ºF to 80ºF (10ºC to 25ºC). Bulk storage tanks should be
equipped with an agitator and/or recirculating loop.
Agitation should gently move the emulsion from bottom to top without incorporating air.
If an agitator is not available, an air diaphragm pump with a capacity of 50 - 100 gallons per minute should be used to thoroughly
Henry Company - 909 NORTH SEPULVEDA BLVD., EL SEGUNDO, CA 90245
Technical Services - 800-486-1278 Email: email@example.com
mix the emulsion, from bottom to top