Rev. 2 - 03/09
Copyright© 2002-2009, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.
PO101S Postal Door
Release Station - Surface
The PO101S Postal Door Release Station pro-
vides for USPS Postal Lock installation and
microswitch control of door release device(s). It is
constructed of a rugged extruded aluminum panel
with durable, flame retardant ABS plastic endcaps.
The extrusion design provides sufficient depth to
make the panel surface mountable with no addi-
tional housing required.
A gasket is also attached to the rear surface to
increase the station's resistance to weather expo-
• Surface mount installation
• Tamper-resistant mounting screws
• Rugged Extruded Aluminum Faceplate
Height: 7.25" (185mm)
Width: 4.90" (125mm)
Depth: 1.50" (39mm)
Rugged extruded aluminum faceplate
with Black ABS plastic endcaps.
Natural Anodized Aluminum.
Two (2) pigtail wire connectors.
ARCHITECTS' AND ENGINEERS'
Postal Door Release Station(s) shall be Alpha Communi-
cations®/Tektone model PO101S or approved equal.
Station shall be surface mountable and shall include a
gasket to provide resistance to weather exposure.
Postal Door Release Station(s) shall be constructed of a
rugged extruded aluminum panel with necessary mount-
ing hardware and a built-in microswitch assembly to
allow for the installation of a separately supplied USPS
Postal Lock. Endcaps for the panel shall be molded of
durable, flame retardant ABS plastic.
The microswitch shall have wire leads to provide for easy
Station(s) be supplied with tamper-resistant mounting