MATERIAL SAFETY DATA SHEET
THIS MSDS ISEFFECTIVE AS OF JULY 31, 20036AND SUPERSEDES
ALL PREVIOUSLY ISSUED MATERIAL SAFETY DATA SHEETS
MSDS NO: 7-PCO105-064
ARCTEC® PCO 105 BRAZING ALLOY
Use: Phos-Copper alloy for TB
Classification : WHMIS Class D, Division 2
Manufacturer/Processor/Importer : Arctec Alloys Limited
Supplier : Arctec Alloys Limited
Address : 4304 - 10 St. N.E., Calgary, Alberta, T2E 6K3
Emergency Tel : (403) 250-9355
PIN : N.AP.
IMPORTANT: Welding fumes cannot be classified simply. The composition and quantity are dependent upon the metal being welded,
the process, procedure and alloy used. Other conditions which also influence the composition and quantity of the fumes and gases to
which workers may be exposed include: number of welds and volume of work area, quality and amount of ventilation, position of
welder's head with respect to the fume plume, as well as the presence of contaminants in the atmosphere, such as chlorinated
hydrocarbon vapors from cleaning and degreasing activities.
When the alloy is consumed, the fume and gas decomposition products are different in percent and form from the ingredients listed in
Hazardous Ingredients. The decomposition products, not the ingredients in the alloy, are important from a health standpoint.
Decomposition products include those originating from the volatilization, reaction, or oxidation of the materials shown in Hazardous
Ingredients plus those from the base metal, coating, etc. as noted above. These components are virtually always present as complex
compounds and not as metals.