BUEHLER®
CASTABLE (CoLd)
MoUNTING CoMPoUNdS
	Versatile Epoxy and Fast Curing Acrylic
Mounting Systems
	Full Range of Products for All Material Applications
	Economical Systems for Heat and Pressure
Sensitive Samples
	Easy to Mix and Safe to Use
	Widest Selection of Related Mounting Accessories
and Molds
	Convenient Packaging for Low and High
Volume Users
	Dispense Epoxies to Correct Ratio With the
EPO-EASE™ Epoxy Dispensing System
BUEHLER®CASTABLEMOUNTINGCOMPOUNDS(COLD)
EPOXICURE™
General Purpose Epoxide
	Excellent adhesion results in good
edge protection
	Low cure temperature, 82°F (28°C),
for heat sensitive samples
	Good flow characteristics
	Low shrinkage and hard mounts
	Transparent
	Solvent resistant
	6-8 hour cure time
EPO-KWICK®
Fast Cure Epoxy
	Air cure in 45 minutes using
SAMPL-KUPS®
	Good flow characteristics
	Good edge protection and
hard mounts
	Transparent
	185°F (85°C) cure temperature
EPO-MIX® Epoxide
	Premeasured, read-to-mix one ounce
portions of EPOXICURE™
General Purpose Epoxide
	Same characteristics as EPOXI-
CURE™
EPO-THIN®
Low Viscosity Epoxy
	Free-flowing, specially formulated
epoxy that fills holes and voids where
other mounting materials fail
	Produces clear, bubble-free mounts,
allowing full view of the embedded
sample
	Low cure temperature, 80°F (27°C)
	18-20 hour cure time means low
skrinkage
	Ideal as a thin section mounting
adhesive
EPO-COLOR™
Dye Enhanced Epoxy
	Used to highlight pores and cracks
which are difficult to distinguish from
base material
	Appears bright red under darkfield or
polarized light. No fluorescent light
required
	1-2 hour cure
	175°F (79°C) cure temperature
Note: Adding FLUOR-MET® Fluorescent Dye
to all epoxy systems, except EPO-COLOR,
is another alternative to make identification
of pores and cracks very easy. Requires
fluorescent light capability on your microscope.
EPO-COLOR™
appears bright
red under
darkfield or
polarized light
EPO-KWICK®
cures in 30-45
minutes
EPO-THIN®
is free