Material Safety Data Sheet
Safety Information: (800) 828-6571
Health Emergency: (716) 422-2177
Rochester, NY 14644
Transportation Emergency: (716)422-1230
Section I - Product Identification
Trade Names/Synonyms: Type 10 Toner
This is not a WHMIS controlled product.
Ingredients (% by wt.)
Polystyrene resin (65-70%)
n-Butylmethacrylate polymer (20-25%)
Carbon Black (10-15%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of water.
See Sections V and VII.
Section III - Toxicology and Health Information
This material has been evaluated by Xerox Corporation.
>16 g/kg (rats) practically non-toxic.
10mg/m3 (total dust)
>3 g/kg (rabbits) practically non-toxic.
15 mg/m3 (total dust)
>8 mg/l (rats, 4 hr exposure)practically non-toxic.1
5 mg/m3 (respirable dust)
>32 mg/l (calculated 1 hr exposure) non-poisonous, DOT.1
Not an irritant
Skin Sensitization: Not a sensitizer.
2.5 mg/m3 (total dust)
Not an irritant.
0.4 mg/m3 (respirable dust)
No mutagenicity detected in Ames, and WP2 Assays.
>1000 mg/l (fathead minnows) non-toxic.
Additional Information: The results obtained from a Xerox sponsored, Chronic Toner Inhalation Study, demonstrated no lung
change in rats for the lowest (1mg/m3) exposure level (i.e. the