Service Repair Manual
Models
135H Motor Grader
Shutdown SIS
Previous Screen
Product: MOTOR GRADER
Model: 135H MOTOR GRADER CBC
Configuration: 135H Motor Grader CBC00001-UP (MACHINE) POWERED BY 3126B Engine
Disassembly and Assembly
120H and 135H Motor Graders Power Train
Media Number -RENR4160-05
Publication Date -01/04/2005
Date Updated -22/05/2017
i05371526
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description Qty
A
439-3938
Link Bracket
2
B
5P-4204
Wrench Assembly
1
C
6V-4876
Lubricant
1
D
8T-5096
Dial Indicator Gp
1
Note: Use a suitable press to install the cones on the drive shafts and the cups. If necessary, only preheat
the cones to 135 °C (275 °F) for no more than 1 hour. It is important to reseat the cone or the cup with a
suitable driver after the bearing and adjacent parts have reached a uniform temperature.
1/9
135H Motor Grader CBC00001-UP (MACHINE) POWERED BY 3126B Engine(SEB...
2020/2/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
Illustration 1
g01060675
Illustration 2
g01060676
1. Lower the temperature of bearing cup (32) and install bearing cup (32) in housing (29). Check for
full seating of the bearing cup with a Feeler Gauge.
Illustration 3
g01060678
2/9
135H Motor Grader CBC00001-UP (MACHINE) POWERED BY 3126B Engine(SEB...
2020/2/6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
2. Place housing (29) in a vertical position with the flange downward.
3. Install lip seal (31) in housing (29). The lip of the seal must face outward. Lubricate the lip seal (31)
with the lubricant which is being sealed.
4. Lower the temperature of bearing cup (30) and install bearing cup (30) in housing (29). Check for
full seating of the bearing cup with a Feeler Gauge.
Illustration 4
g02782189
5. Apply Tooling (C) onto thrust washer (28). Apply Tooling (C) onto surface (X) and surface (Y).
Install thrust washer (18).
Illustration 5
g02782206
6. Ins