Contents
Directions-Using the SRS Scan and reset for BMW………………………............3
Function Reference……………………………………………………………………3
Code Reading Example ………………………………………………………………4
Using the Code Tables(which one to use )……………………………………….…4
Code Tables……………………………………………………………………….……5
Glossary ………………………………………………………………………………..14
Appendix…………………………………………………………………………….….15
Troubleshooting ………………………………………………………………………15
Adaptor Advice…………………………………………………………………….…..15
www.uiftech.com
1
Tool Description
LCD DISPLAY
ENTER BUUTON
1. LCD DISPLAY: shows the test results.
2. ENTER BUTTON: confirms a selection of a menu list, or returns to the main menu.
3. SCROLL BUTTON: Scrolls through menu items or cancel an operation.
4. OBD II CONNECTOR: Connects the B200 to the vehicle’s Data Link Connector (DLC)
2
OBD II CONNECTOR
SCROOL BUTTON
DIRECTIONS
1.) Turn on key (DO NOT START CNGINE)
2.) Plug tool into diagnostic connector Tool is ready to use when it displays “FA”.(Reverse
steps 1 and 2 if you encounter problems)
3.) Use the “Scroll” button to select one of the following functions:
Functions:
Read Airbag Faults.
How to Read Airbag Faults. The tool automatically starts in the “FA” mode, (though it won’t
read the fault codes until you press the “ENTER” button). When ENTER is pressed the first
number shown will be the correct code chart to use.
Note: if it shows “--”. There are on codes to display. Pressing ENTER a 2nd time will display
the first fault code (see page 6 for explanation.) To view the next fault press ENTER again,
and so on. At the end of the fault list the display will show “--”.Press ENTER to return to
“FA”. lf you encounter problems see troubleshooting page 15”
Clear Airbag light/Faults:
How to Clear the Airbag (SRS) Light. It is important what you know exactly why the
airbag light came on before resetting it always read the code and look it up first.
WARNING: DO NOT PROCEED WITH RESET UNTIL TAKING APPROPRI