Most of the steel structures in India are made of conventional steel sections such as angle, channel and beam sections . However, new hollow steel sections such as square and rectangular hollow sections are gaining popularity in recent steel constructions due to a number of advantages such as its higher strength to weight ratio, better fire resistance properties, higher radius of gyration, lesser surface area, etc. This type of hollow sections can save cost up to 30 to 50 over the conventional steel sections Tata Steel brochure, 2012 17 . But unlike the conventional steel sections these hollow sections do not have standard connection details available in design code or in published literature. To overcome this problem the objective of the present study was identified to develop a suitable and economic connection detail between two square hollow sections which should be capable of transmitting forces smoothly and easy to be fabricated. To achieve the above objective, a square hollow beam to square hollow column connection was selected and modeled in commercial finite element software ABAQUS. This model was analyzed for nonlinear static pushover analysis considering a number of connection details. Following four alternative scheme of connection details were selected for this study i using end plate, ii using angle section, iii using channel sections, and iv using collar plates. The base model rectangular hollow beam welded to one face of the rectangular hollow column is also studied for reference. The performance of the selected connection details are compared and the best performing connection details is recommended for rectangular hollow beam to rectangular hollow column joints. The result shows that the load carrying capacity of the joint and the maximum deformation capacity is highly sensitive to the type of connection used. Also, the location of formation of plastic hinges in the structure which can beat joint or at beam depends highly on the type of connection used. Udit Dubey | Kapil Mandloi | Renu Tiwari "Analysis of High Rise Building Connection for Square Hollow Beam and Column Using Fem Software Abaqus" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47704.pdf Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47704/analysis-of-high-rise-building-connection-for-square-hollow-beam-and-column-using-fem-software-abaqus/udit-dubey
International Journal of Trend in Scientific Research and Development (IJTSRD) provide a digital platform where author can promote their original research / review work, innovation / new ideas, Comparative / Comparison study in various fields. Our Aim is knowledge sharing between researchers, developers, engineers, students, and practitioners working in and around the world.