101 88 55-26
Workshop Manual
Husqvarna Chain Saws
Eng, front
96-09-13, 10.38
1
2 – English
LIST OF CONTENTS
Introduction ..................................... 3
Safety regulations ........................... 5
Technical Data ................................. 6
Tools ............................................... 14
Service data ................................... 20
Trouble shooting ........................... 40
Safety equipment .......................... 42
Starter ............................................. 57
Electrical system ........................... 61
Centrifugal clutch .......................... 67
Lubrication system ....................... 70
Carburettor..................................... 83
Air filter ........................................ 101
Tank unit....................................... 103
Anti-vibration system.................. 106
Piston cylinder............................. 108
Crankcase and crankshaft.......... 114
Eng, p 2-39
96-09-13, 09.05
2
English – 3
INTRODUCTION
As production continues, changes will be intro-
duced successively to the chain saw. If at any
time these changes influence service and/or
spares, special service announcements will be
sent out, which means that this manual will cease
to be current with time. In order to avoid prob-
lems, the manual should always be read together
with all service announcements that apply to the
specific model of chain saw.
Layout
The descriptive sections in this workshop manual
are set out in a number of flow diagrams. When
carrying out repairs on a specific chain saw,
follow the signs that apply to the saw in question.
Diagrams are not numbered as they are linked to
the actual text, either by lines or by being in the
same box.
Positional directives to components inside the
diagrams are designated with A, B, etc. and start
from A again in each new section.
General
Updates
Always use Husqvarna original:
•
Spare parts
•
Service tools
•
Accessories
For specific procedures special tools are re-
quired. In this workshop manual, all the s